File Activation.xml Autocom Keygen 45

How to Activate Autocom 2020.23 Software with No Limits Keygen

Autocom is a popular diagnostic software for cars and trucks that allows you to perform various functions such as reading and clearing fault codes, live data, actuator tests, service reset, coding and programming. However, to use Autocom software, you need to activate it with a file activation.xml that matches your hardware serial number.

In this article, we will show you how to activate Autocom 2020.23 software with no limits keygen that does not require any email activation or date change. This keygen can generate unlimited file activation.xml for any serial number of Autocom devices. You can also use this keygen to update your firmware to the latest version 3201 that supports newer cars and models.

Step 1: Download and Install Autocom 2020.23 Software

The first step is to download and install Autocom 2020.23 software on your computer. You can find the download link in the attached file below. The software is multi-language and does not require a password. After downloading, extract the zip file and run the setup.exe file to install the software.

Step 2: Run No Limits Keygen and Generate File Activation.xml

The next step is to run the no limits keygen that can generate file activation.xml for any serial number of Autocom devices. You can find the download link in the attached file below. The keygen requires changing the date on your computer to 13-12-2021 before running it. To make this easier, we have included a date patch that automatically changes the date to the time the keygen is running and restores it after it is turned off.

To use the keygen, follow these steps:

Run the date patch as administrator and click on Start.

Run the no limits keygen as administrator and enter your hardware serial number (for example, 100251).

Click on Generate FileActivation.xml button and save the file to your desktop.

Close the keygen and click on Stop on the date patch.

Step 3: Activate Autocom 2020.23 Software with File Activation.xml

The final step is to activate Autocom 2020.23 software with the file activation.xml that you generated in the previous step. To do this, follow these steps:

Connect your Autocom device to your computer via USB cable.

Run Autocom 2020.23 software as administrator and go to Settings > Hardware Setup.

Click on Test button to check if your device is detected.

Click on Browse button and select the file activation.xml from your desktop.

Click on Activate button and wait for the activation process to complete.

Restart Autocom 2020.23 software and enjoy!

Bonus: Update Firmware to Version 3201

If you want to update your firmware to the latest version 3201 that supports newer cars and models, you can do so by following these steps:

Go to Program Files > Autocom > Firmware folder and make a backup of your current firmware files.

Download the firmware version 3201 from the attached file below and copy paste it to Program Files > Autocom > Firmware folder.

Run Autocom 2020.23 software as administrator and go to Settings > Hardware Setup.

Click on Upgrade Firmware button and wait for the firmware update process to complete.

Restart Autocom 2020.23 software and enjoy!

Note: The firmware version 3201 is recommended for single board Autocom devices. If you have a two board device, you may encounter some problems with this firmware. In that case, you can use the older firmware version 1622 that works on all clones.

Conclusion

In this article, we have shown you how to activate Autocom 2020.23 software with no limits keygen that does not require any email activation or date change 061ffe29dd