How to Install Drivers for KWP2000 Plus on Windows 7
KWP2000 Plus is a device that allows you to read and write data from your vehicle's on-board diagnostics system (OBD). It uses the Keyword Protocol 2000 (KWP2000), which is a standard communication protocol for OBD systems. However, to use KWP2000 Plus on your Windows 7 computer, you need to install the correct drivers first. Here are the steps to do that:
drivers kwp2000 plus windows 7
Download File: https://www.google.com/url?q=https%3A%2F%2Fshoxet.com%2F2tH9VI&sa=D&sntz=1&usg=AOvVaw3qKyRfG-nN6icerBM70-Nx
Download the drivers from the CD that came with your KWP2000 Plus device, or from the official website of the manufacturer. The file name should be something like CDM20814_Setup.exe.
Run the downloaded file and follow the instructions to install the drivers. You may need to restart your computer after the installation.
Plug in your KWP2000 Plus device to your computer using a USB cable. Windows 7 should automatically detect the device and install the drivers for it. You can check if the device is recognized by going to Device Manager and looking for a \"USB to Serial device\" under Ports (COM & LPT).
If Windows 7 does not find the drivers for your device, you can manually update them by right-clicking on the \"USB to Serial device\" in Device Manager and selecting Update Driver Software. Then, choose Browse my computer for driver software and select the folder where you installed the drivers in step 2.
Once the drivers are installed, you can use your KWP2000 Plus device with any compatible software, such as ECU Flasher or ECU Reader. Make sure you select the correct COM port and baud rate for your device in the software settings.
That's it! You have successfully installed drivers for KWP2000 Plus on Windows 7. Now you can enjoy reading and writing data from your vehicle's OBD system with ease.
Troubleshooting Tips for KWP2000 Plus on Windows 7
If you encounter any problems while using KWP2000 Plus on Windows 7, here are some tips to help you solve them:
Make sure your KWP2000 Plus device is connected to your vehicle's OBD port properly. The device should have a green LED light on when it is powered on.
Make sure your vehicle's ignition is switched on, but the engine is not running. Some OBD systems may not communicate with the device if the engine is running.
Make sure you have selected the correct protocol for your vehicle in the software settings. KWP2000 Plus supports ISO 9141-2, ISO 14230-4 (KWP2000), and ISO 15765-4 (CAN) protocols. You can check your vehicle's protocol by looking at the OBD port. If it has 16 pins, it is likely to use CAN protocol. If it has fewer pins, it may use KWP2000 or ISO 9141-2 protocols.
Make sure you have selected the correct COM port and baud rate for your device in the software settings. The default COM port and baud rate for KWP2000 Plus are COM4 and 38400 bps, respectively. However, these may vary depending on your computer and device configuration. You can check the COM port and baud rate of your device by going to Device Manager and looking at the properties of the \"USB to Serial device\" under Ports (COM & LPT).
If you still cannot connect to your vehicle's OBD system, you may need to update the firmware of your KWP2000 Plus device. You can download the latest firmware from the official website of the manufacturer and follow the instructions to update your device.
We hope these tips help you use KWP2000 Plus on Windows 7 without any issues. If you have any questions or feedback, please feel free to contact us. 0efd9a6b88